18 June 2019

5 reasons to check the knives in your TMR mixer regularly

Why you should check your auger knives regularly

It is a good idea to regularly check the knives in your feed mixer for wear and tear. Damaged or worn knives may result in a host of unforeseen costs. Even so, such costs can easily be avoided. It is recommended to check the knives each month and, depending on the number of operating hours, how the forage shaft behaves in the feed, etc. replace them every one to two years. Worn knives can have unpleasant consequences. That's why below we have listed the 5 most important reasons why you should check the auger knives in your mixer feeder wagon regularly.

1.    Sharp knives ensure a better mixture
If the feed is not cut well, it is harder to achieve even ration mixtures, making it more difficult for cows to choose their feed. This means that not every cow may get the nutrition it needs. In turn, this has a negative effect on the animals' health and, ultimately, their milk production.

2.    Sharp auger knives in your mixer wagon save fuel

It will come as no surprise that it is difficult to cut things properly with a blunt, worn knife. If the knives are blunt, an unnecessary amount of power is drawn from the tractor and it takes longer to cut the feed into well-mixed rations. This is why it is definitely worth taking the time to inspect the knives regularly and replace them where required.

3.    Hardware disease may arise from damaged knives
Damaged auger knives may cause hardware disease. Loose metal parts may end up in feed and present serious health risks. This is why you should regularly check (preferably every month) that the knives do not show any signs of cracks. It is also a good idea to place magnets in the tmr mixer to filter metal out of the feed.

4.    Sharp knives significantly reduce mixing times
The cutting action is better if the auger knives are in good condition. Worn or blunt knives cut less effectively, meaning it takes longer for the feed to be cut to the right length and mixed properly.

5.    Less wear and tear on the auger and mixing tub
Sharp auger knives cut feed better and more quickly, making it easier for the feed to be transported and mixed using the mixing tub. If the knives are worn and cannot cut the feed properly, feed may build up between the auger and the wall. As a result, the mixing tub and the augers could suffer more wear and tear. In addition, shorter mixing times with sharp auger knives mean that the feed mixer will not show signs of wear so soon.

Alongside these five reasons to keep your auger knives in a good condition, it is important that the right knives are fitted in the correct positions in order to be able to cut certain types of forage properly. By way of example, processing round bales requires long knives instead of short ones in certain positions. You should therefore check whether the knives in the TMR mixer are suited to the type of forage. We explain the best positions in which to install the knives in this video.

Self-sharpening Trioform auger knives

Trioform auger knives from Trioliet are unique in shape, meaning they remain sharp for a relatively long time. The blade in these knives is through-tempered on the upper side and not on the lower side. As a result, the friction of the feed on the lower side ensures the knives are sharpened during each mixing process. Furthermore, the Trioform knives are installed horizontally, enabling the feed to be cut optimally and with the least resistance at all times.


Read the story of dairy farmer Pieter Delisse

Read more about self-sharpening Trioform auger knives